BATTERY CHARGERS
The MPL Charger is available in 12V, 10A, 50A, and 24V 10A, to meet the charging requirements of most battery sizes.
The MPL is suitable for use on AGM, GEL, Calcium and Lead Acid battery types. The MPL is used by some of the world's leading vehicle and battery manufacturers and it features our own patented Sulphation Recovery System. To read more specifications of the MPL download the MPL factsheet here.
OVERVIEW
MPL4 is available for pre-order, with shipping beginning May 2026.
The MPL-4 charger from Traction Charger has been designed with the latest and future workshop standards in mind. Updates can be downloaded from our website and loaded using the supplied lead.
Suitable for most common battery types LiFePO4, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL-4 features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.
As with all Traction Battery Chargers the MPL-4 is manufactured at our own UK site
MPL-4 comes with with a sensing lead set allowing the ultimate in efficient charging. MPL-4 also features a constant output mode for battery support functionality at up to 125A.
MPL-4 is available in shelf, ramp and portable versions.
MPL-4 meets the requirements of Mercedes Benz W 000 588 07 81 00 Charger specification
3 versions - Bench Mount, Wall/Post Mount and Portable/Desktop. Portable/Desktop will be available soon.
JLRSST151 APPROVED PRODUCT
The MPL50B charger has been designed with the latest JLR workshop standards in mind.
Suitable for most common battery types – Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL50B features Traction’s patented desulphation technology ensuring the battery is in peak condition before commencing charge.
As with all Traction battery chargers the MPL50B is manufactured at our own UK site.
The rectified DC output of the MPL50B achieves significantly higher standard of charge than its switched mode competitor.
MPL50B also features a 230V constant output mode for battery support functionality.
The MPL80 charger from Traction has been designed with the latest JLR workshop standards in mind.
Suitable for most common battery types – Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL80 features Traction’s patented desulphation technology ensuring the battery is in peak condition before commencing charge.
As with all Traction battery chargers the MPL80 is manufactured at our own UK site.
The rectified DC output of the MPL80 achieves significantly higher standard of charge than its switched mode competitors.
The MPL10 charger from Traction Direct has been designed with the latest JLR workshop standards in mind.
Suitable for most common battery types – Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL10 features Traction’s patented desulphation technology ensuring the battery is in peak condition before commencing charge.
As with all Traction battery chargers the MPL10 is manufactured at our own UK site.
The rectified DC output of the MPL10 achieves significantly higher standard of charge than its switched mode competitors.
Not LiFeP04 Compatible.
The Duo charger will correctly charge the two batteries of a 24v system saving money and extending battery life.
In use, the two 12V batteries that makeup a 24V system discharge and charge at uneven rates, which results in loss of capacity and early failure.
The Duo Charge assesses each battery individually and applies the correct charge to each battery, maximising battery life and reliability.
The Duo Charge does this without the need to remove or disconnect the batteries, it takes no longer to set up than a conventional 24v charger, and because it assesses the batteries individually it can take less time to fully charge both batteries.
The Duo product is now a custom build - please contact us for pricing at sales@traction-direct.com
Introducing the new SPIC-50 Battery Charger.
Lithium Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid battery types covered
Customisable Interface to battery BMS systems
Customisable charge profiles
50A Constant output function for diagnostic support
3-stage charging: CI-CV-Float
Short Circuit shutdown
Reverse Polarity Protection
Soft start
Fast constant current bulk charge
Constant voltage float/standby
Features a customisable interface to the battery BMS system with LIN bus support
Temperature adjusted charge profile for safe Lithium battery charging
Output leads zero volts until the battery is connected and the charge process started
OVERVIEW
The MPL50-LI charger from Traction has been designed with the latest workshop standards in mind.
Suitable for most common battery types – LiFePO4, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL50-LI features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.
As with all Traction battery chargers the MPL50-LI is manufactured at our own UK site.
MPL50-LI is available with an optional temp sensing lead set allowing the ultimate in efficient charging.
MPL50-LI also features a 13.4V constant output mode for battery support functionality at up to 50A.
MPL50-LI is compatible with CDU-1 Charge Distribution Unit.